User's Manual

OmniAccess 3500 Nonstop Laptop Guardian Release 1.6

4. A fourth RADIUS Login prompt window appears (Error! Reference source not

found.). Fill the Response field with your passcode (PIN + tokencode) after the

tokencode has changed value on the RSA SecureID display. Click OK.

Figure 17: Fourth RADIUS Login prompt window for first login

5. A login confirmation window appears (Error! Reference source not found.) if you

have entered all credentials successfully.

Figure 18: RADIUS Login confirmation window for first login

Note: If you enter wrong values for your credentials (whether the PIN or the token

code) for three consecutive times, you will be placed in next token-code mode. In this

mode, you will have to enter the correct passcode twice.

System Generated PIN

RSA Authentication Manager can be configured by the administrator such that the user

can either get a System generated PIN or user can enter a new PIN. You can receive a

system - generated PIN by entering ‘Y’ in the Response field as shown below if RSA

manager is configured for the cards.