User's Manual

OmniAccess 3500 Nonstop Laptop Guardian Release 1.6
10
press ‘Authenticate and Connect’ button next to it. While establishing
connection via hotspot if you get either "Action Cancelled" or "The page cannot
be displayed" window then try refreshing the browser page. For more on
connecting to public. (See also How do I connect from a public hotspot?)
o SSL VPN Access: Situations where the OmniAccess 3500 NLG card cannot reach
the company’s gateway because IPSec traffic is blocked by the visited network,
end user can establish connection to the company’s SSL VPN server by selecting
available loop back or wireless interfaces from the Interfaces section and
pressing the “Enable” button to get an access to the company’s SSL VPN portal.
• The 3G section provides control for and information about the 3G modem that is
integrated in the OmniAccess 3500 NLG card. Available Options:
Figure 10: 3G Section of the OmniAccess 3500 NLG Client window
o Radio ON/OFF: The 3G modem integrated in the OmniAccess 3500 NLG card
can be switched On or Off from the toggle switch located at the center of the
OmniAccess 3500 NLG card. A small window in this section will show the
current status of the 3G modem. “Radio ON” status means the modem is On
and connection over 3G are available. “Radio OFF” status means the modem is
Off and connection over 3G cannot be established. To change the status,
please toggle the switch on the Card.
o Auto 3G Connect: If the check box is checked then the connection over 3G
interface will be made automatically if required. Otherwise you will be
prompted before connecting over 3G.
o 3G Status: Pressing of this button will open up a new screen displaying more
detailed information about 3G modem and its status. The content of this screen
will be different based on the type of OmniAccess 3500 NLG card used as shown
in Figure 11. You would not require this information for normal operation. It is
only useful if you are facing any problem related to connecting over 3G.