User's Manual

3/16/04 Step 1: Collecting Required Tools and Supplies
90-100832-000 Rev 5Alcatel OmniAccess Wireless Access Point Quick Installation Guide 4
Step 1: Collecting Required Tools and SuppliesStep 1: Collecting Requ ired Tools and Supplies
• One OmniAccess AP or OmniAccess AP 1200R per location.
• OmniAccess AP and OmniAccess AP 1200R Mounting Kits, factory-supplied with each
OmniAccess AP.
• Optional OmniAccess AP and OmniAccess AP 1200R Mounting Kits, factory-orderable.
• Optional external AC-to-DC power supplies, factory-orderable.
• Optional external 802.11b/g antennas.
Note: Refer to the Alcatel OmniAccess Wireless System Release Notes for 802.11a external
antenna information. Contact Alcatel Internetworking, Inc. for a list of approved 802.11a and
802.11b/g external antennas.
• Map showing OmniAccess AP and OmniAccess AP 1200R locations, and mounting and power
options.
• Screwdrivers, drills, and ladder.
• An assortment of sheet metal and drywall screws and toggle bolts.
• CAT-5 (or higher) cables to connect the OmniAccess AP and OmniAccess AP 1200R locations
and the OmniAccess Wireless Switch or other network device.
• Optional Kensington MicroSaver Security Cable to secure each OmniAccess AP and OmniAccess
AP 1200R.
Continue with Step 2: Configuring the OmniAccess AP or OmniAccess AP 1200R Before Installation
.