- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
66
Error messages
Problem
Possible cause and
solution
Allowed cred-
it reached!
You are trying to place
an outgoing call and the
allowed credit is already
reached.
The allowed credit limit
is reached during an
outgoing call (the call is
then aborted).
Busy
You are trying to make a
call and the call fails be-
cause the destination
number is already en-
gaged in conversation.
Call failed
The user is unreachable.
The outgoing call fails
due to:
the network cannot
take the call due to sys-
tem busy or
the number is out of or-
der or
the number is unreacha-
ble or
the network does not
answer or
the option to hide your
phone number when
calling is not supported
by the network
Control the ability to
hide your ID when mak-
ing a call (service availa-
bility in network).
Cancelled. No
type selected
Cell broadcast activa-
tion has been requested
but no message type
has been selected.
Problem
Possible cause and
solution
Cannot exe-
cute com-
mand
You have made a re-
quest which is impossi-
ble to be executed in
the current call situa-
tion.
Can't display
message
The short message text
cannot be displayed
(characters not recog-
nised, incorrect format
etc.)
Check SIM!
There is no SIM present
or the SIM is incorrectly
inserted.
Check your
password
You changed the call
barring password or
You changed the call
barring service status.
The entered password
seems to be wrong or
incorrect.
Check your
request
You made a request for
a service that seems to
be impossible to fulfil.
Check your
subscription
You tried to activate a
GSM service. You are re-
quested to check your
subscription regarding
the related service
rights of use/access.
Error!
The network cannot
perform your request
and generates an error
result.
Failed
An SMS sending process
failed (the short mes-
sage cannot be sent).
Incorrect en-
try
You entered a character
string with a syntax er-
ror.