- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
57
Internet/WAP™
Once connected your operator
menu is displayed. The icon at
the top of the display indicates a
circuit connection. The icon is
shown if your phone is connected
to a GPRS
1
network during the
WAP™ session.
During page browsing, security
can be activated (on a https link
only). This lets you continue local
browsing (via the cards in the
memory). When a connection to
the network is needed again, a se-
cured connection is requested to
the same profile.
When the secured connection is
established, the icon at the top
of the display indicates a circuit
connection in secure mode. The
icon is shown if your phone is
connected to a GPRS network
during the WAP™ session in se-
cure mode.
Creating bookmarks
Bookmarks provide direct links to
determined WAP™ pages. You
can store direct links to these pag-
es.
There are two ways of registering
bookmarks (maximum: 20):
• Directly from the standby display,
• During a circuit connection whilst
viewing a page,
Using bookmarks
Bookmarks can be used:
• directly from standby display:
• whilst you are browsing the
WAP™
:
User pref-
erences
To configure the
browser and allow it
to display the pages
in full screen mode,
large, medium or
small fonts, to allow
or forbid pictures
download and script
execution in WAP™
pages.
Push pref-
erences
See Receiving push
messages, page 58.
1.GPRS availability is network dependent.
When activating the secured mode the mobile and the
server undergo exchanging certificates. You may then
be asked to accept this exchange.
!
Press . Select WAP™.
Select Bookmarks . The
list of bookmarks is displayed
in alphabetical order.
Select an empty entry ([...]).
Select and enter the
requested information in the
following fields:
Item Action
Alias
Name you want to
give to your book-
mark
Address
Home page address
(if known)
Select Save to store the
data.
Press .
Select Bookmarks , then
follow the above procedure.
Bookmarks can be Edited or Deleted from the Book-
marks item under the WAP™ menu options whilst
offline or online.
Press . Select WAP™.
Select Bookmarks .
Select the bookmark name
you require to directly
connect to the corresponding
WAP™ site.
Press to display the
options menu.
Select Bookmarks .
Select the bookmark name
you require .
1. Selecting OK directly launches connection to
the selected bookmark.
1
2
3
4
1
2
!
1
2
3
1
2
3
!