- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
56
The appearance of these items in
the above options menu may be
operator dependent.
Ending the online connection
To end the WAP™ connection:
Selecting a preferred bearer
When defining mixed (Circuit+Packets
1
)
based profiles, you have to select the de-
fault bearer to be used when initiating a
connection. If an error is detected the oth-
er one can then be proposed and used
('Use alternate connection mode?' is dis-
played).
To select a preferred bearer:
Personalising your connection
settings
The following user settings are
available and enable to optimise
the phone behaviour during
WAP™ connection.
Other site
+ New ad-
dress
To provide access to a
specific URL, based on
the corresponding menu
item.
Other site
+
New ad-
dress
Bango
To provide quick access
to a specific input URL
Other site
+
Address
List
To provide access to one
of the last seven en-
tered URL addresses
Push Mes-
sages +
Push in-
box
To provide access to the
list of all the push mes-
sages stored in the In-
box.
If no message is availa-
ble, an information mes-
sage ’Push inbox -
Empty’ is displayed.
Push
messages
+ statis-
tics
To provide access to the
push message informa-
tion (inbox statistics).
Settings Same as when offline
Down-
load pic-
tures
To download in the in-
box all the pictures dis-
played in the current
page.
This item is only dis-
played if some pictures
are present in the page
Discon-
nect
To disconnect the
browser from the net-
work. However the
browser remains active
locally with the current
page displayed.
Close ses-
sion
To disconnect the
browser from the net-
work. The current page
is lost and the
WAP™
menu is displayed again.
Item Action
Press twice.
You can also select Close session item under the
options menu.
1.GPRS availability is network dependent.
Press . Select WAP™.
Select Settings .
Select User preferences .
Select Preferred bearer
(Circuit or Packets) .
Select Save to store the
data.
The Prefered bearer sub-menu may not be available
on your mobile (operator dependent feature).
Press . Select WAP™.
Select Settings .
A list allows to select different
options:
Option Action
Clear
cache
To delete the informa-
tion stored (during
connection sessions)
in the Cache memory.
Clear ad-
dress list
To delete the seven
last addresses entered
in the URL list.
!
1
2
3
4
!
1
2
3