- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
48
To listen to the voice memo,
The recorded memo length of time
is displayed.
To erase the memos
Calculator
This feature allows simple calculations using
+ (plus), - (minus), * (multiplication), / (divi-
sion) and % (percentage) functions.
If the currency converter is initialised, num-
bers can be converted during calculations.
To use the calculator,
Press keys to to type numbers.
Press the multitap (for further de-
tails on the multitap text entry meth-
od please see Entering text, page 21)
to get
+, -, * and / symbols. Use the
multitap to type decimal points or
%.
Press
Clear during a calculation to
correct an entry. Press
= to get
the operation result.
e.g:
144 x 12 = 1728
Pressing = again after obtaining
the first result continues the calcula-
tion via the obtained result and the
last operator (
+, - ,* ,/) symbol.
Following the above example, press-
ing
= again calculates 1728 x 12
= 20736
Pressing
Clear deletes the result.
An integrated currency converter facility
is also available.
The currency converter
needs to be set before being used. See
Currency converter underneath.
e.g. using the currency converter £-
€:
€ 154 +€ 3 = £ 97.1374
In the example, pressing = again
calculates £ 97.1374 +
€ 3 =
£ 98.9935.
Press . Select Office Tools.
Select Voice memo .
Select Play back .
Select Read to listen to the
memo.
Select Stop to end the
memo playing.
Press . Select Office Tools.
Select Voice memo .
Select Play back .
Select Read .
Select Erase to delete the
memos from the memory.
Press . Select Office Tools.
Select Calculator .
The calculator icon ( ) and 0
are displayed. The phone is ready
to perform simple calculations.
1
2
3
4
5
1
2
3
4
5
1
2
Key se-
quence
Display
144
*
12
= 1728
The % function can only be used (entered) as the last
operator during a calculation.
e.g.250 - 10% = 225
Key se-
quence
Display
Curr.
95.2813
+
1.8561
=
97.1374
1. This example was made on the basis of the fol-
lowing exchange rate: 1 = £ 0.61871.
2. The Currency converter feature can be reached from
the Calculator and from the Currency converter sub-
menus.
!
!