- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
40
The phone lock code is also required
to reset the call timers. Once this fea-
ture is activated the code is then asked
each time the phone is turned on.
To change the phone lock code:
To activate / deactivate the
phone lock code,
PIN code
Your SIM card was provided with a 4
to 8 digit PIN code as a protection
against unauthorised usage. When
enabled the PIN code is required each
time you turn your mobile on. If a
wrong PIN code is entered three times
in succession your SIM card is
blocked. The 8 digit PUK code is then
requested to unblock your phone.
Please contact your service provider to
get this code.
To activate the PIN protection:
To change the PIN code (PIN must
first be enabled),
PIN2 code
PIN2 code prevents unauthorised ac-
cess to some of the mobile features
(e.g. activating/deactivating FDN op-
erations, modifying the FDN phone-
book, setting calls costs to zero,
modifying the costs display features).
This code can be changed but not be
activated or deactivated.
Please contact your service provider to
get your PIN2 code.
To change the PIN2 code,
PUK code
The PUK (PIN unblock key) is an 8 digit
code supplied by your service provid-
er. It is used to unblock the phone
when a wrong PIN code has been en-
tered incorrectly three times. A PUK
code cannot be changed.
When requested enter the PUK code
and select OK . You are then asked
to enter a new PIN code. Follow the dis-
played prompts to reset the PIN code.
PUK2 code
The PUK2 is an 8 digit code supplied
by your service provider. It is used to
unblock the phone when a wrong
Press . Select Settings.
Select Security .
Select Phone lock change
and follow instructions
displayed.
Press OK to validate the
new code.
Press . Select Settings.
Select Security .
Select Phone lock enable (if
the code was disabled) or
Phone lock disable (if the
code was enabled) and
enter your Phone lock code.
Emergency calls can still be made when phone lock is
activated.
Press . Select Settings.
Select Security .
Select PIN enable (if the
code was disabled) or PIN
disable (if the code was ena-
bled) and enter your Pin
code .
1
2
3
4
1
2
3
!
1
2
3
Press . Select Settings.
Select Security .
Select PIN change and
follow the displayed informa-
tion.
Press OK to validate your
new PIN code.
Press . Select Settings.
Select Security .
Select PIN2 change and
follow the displayed informa-
tion.
Press OK to validate your
new PIN code.
If you have entered the wrong PUK code 10 times in
succession your SIM card is definitely blocked. Contact
your service provider to get a new card.
1
2
3
4
1
2
3
4
!