- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W

36
To check the call divert status or deac-
tivate it:
To cancel all (multiple) diverts,
Call waiting
This network dependent feature al-
lows to receive a new call while a call
is already on (please contact your serv-
ice provider for more information).
To activate the call waiting feature:
Whilst on a call a beep sounds when a
second call comes in.
Select Replace to end Call1 and an-
swer Call2 or select Reject to refuse
Call2 and go on with Call 1.
To put a call on hold and switch from
Call 1 to Call 2:
Divert
options
Action
Always
To divert all incoming
voice calls.
When
not
reacha-
ble
To divert all voice calls
when the phone
cannot be reached (out
of service).
On no
reply
To divert all voice calls
when the call is not
answered to.
When
busy
To divert all voice calls
when the line is
engaged.
All con-
ditions
To divert all voice calls
when Not Reachable,
No Reply and When
Busy.
Cancel
all
To cancel all diverting
options.
All FAX
calls
To unconditionally
divert incoming fax
calls.
All
DATA
calls
To unconditionally
divert incoming data
calls.
Select one of these options
and select OK
Select Activate .
Select Voice Mail, Names or
Number .
Enter the number the calls
have to be diverted to and
select OK . A validation
message bearing the selected
number is displayed.
1. If the 'On no reply' option is selected please enter
the time limit (5, 15 or 30 seconds; this also depends
on your network) after which the feature is valid.
2. Call diverts for both Line 1 and Line 2 have to be set
for each line. Only the selected line is affected by the
call divert.
Press . Select Settings.
Select GSM Services .
4
5
6
7
!
1
2
Select the call diverting type
to be checked or
cancelled .
Select Status or Cancel .
Press . Select Settings.
Select GSM Services .
Select Call diverting .
Select Cancel all .
1. This action cancels all call diverts (for voice, faxes
and data calls) for the current line.
2. To cancel call diverts for the other line you must
select this other line first (menu Calls & Times - Line
selection).
Press . Select Settings.
Select GSM Services .
Select Call waiting .
Select Activate . Acti-
vated or Check your
request is then displayed.
You can also cancel or check the service status.
Whilst on a call a beep sounds
to indicate a second incoming
call.
Select Replace to take Call 2
and end Call 1, Select Reject
to refuse Call 2 or press the
key to put Call 1 on hold
and take Call 2.
3
4
1
2
3
4
!
1
2
3
4
!
1