- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W

34
Backlight - setting
To adjust the backlight:
Display contrast
To adjust the contrast:
Any key answer
If you want to answer a call by press-
ing on any key (except
and No
ring ).
Speed dialling
Phonebook numbers can be assigned
to keys to . The key voice
mail feature cannot be assigned a
phonebook number as it is assigned
by default to the voice mail number
(see Voice dialling, page 18).
Numbers stored in both the SIM card
and the phone (except from fixed di-
alling numbers) can be selected.
To assign phonebook numbers to the
speed dialling keys:
Auto answer
This feature only works when the
phone is connected to a handsfree car
kit or to a headset. The phone then
automatically answers the call after
about 5 seconds (no key to be
pressed).
Auto retry
This allows the phone to automatical-
ly redial the number after the call
failed due to an engaged line or an
unavailable signal from the network.
The number is re-dialled 10 times
maximum until it goes through.
Press . Select Settings.
Select Display .
Scroll down and select
Backlight .
Adjust the backlight with the
and keys and press
OK
Select Save to store the
setting.
If the keypad lock is on, no backlight comes up when
pressing on the mobile keys.
Press . Select Settings.
Select Display .
Scroll down and select
Contrast .
Adjust the contrast with the
and keys and press
OK .
Select Save to store the
setting.
Press . Select Settings.
Select Keys .
Select Any key answer .
and select On .
1
2
3
4
5
!
1
2
3
4
5
1
2
3
Press . Select Settings.
Select Keys .
Select Speed Dial .
The Key number and the
attached name (if any) is dis-
played. Select Names (or
Options then Names
if a number was already
attached to the key) to
choose a name from the
names list.
Select OK to validate.
If a number which has been assigned to a speed dial
key is deleted from the phonebook the corresponding
number is automatically deleted from the speed dial
key.
Press . Select Settings.
Select Phone settings .
Select Auto features .
Select Auto-answer and
choose On .
Select Save to store your
setting.
Press . Select Settings.
Select Phone settings .
Select Auto features .
1
2
3
4
5
!
1
2
3
4
5
1
2
3