- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W

31
Settings
To select a note, press on the corre-
sponding key on the keypad (regard-
less of the letters on the keypad).
e.g.:
• press key 1 to get the C
• press key 2 to get the D
•etc.
The different symbols can be used one
after another (e.g. G+#2= G sharp
plays one octave higher for twice the
basis tempo).
To edit, delete or play a registered
melody:
To view the composed melodies sta-
tistics:
Key Action
C C
D
D
E
E
F
F
G
G
A
A
B
B
p
to insert a pause
octave up
octave down
#
sharp
2 note duration (400 ms)
3
note duration (600 ms)
4
note duration (800 ms)
Short press: to move
the cursor to the next
character.
Short press: to move
the cursor to the
previous character.
(
Clear)
Short press: to go back
to the previous screen if
nothing on the entry
field or clear the last
typed character.
Long press: to go back
to the idle screen if
nothing on the entry
field or clear all typed
characters.
(Play)
To play the melody.
OK
To validate and store
the edited melody.
The basis tempo is 200 ms.
1. If the same signs (e.g. 2 octave, 2 duration or 2
sharp signs) are used one after another one only is
taken into account. The other(s) are deleted during
melody playing or storing process.
2. You can enter up to 128 characters per melody.
3. You can register 10 composed melodies on your
mobile.
Select Play to listen to
your composed melody.
Select OK to store the
melody.
Type the melody name in and
select OK to store it.
Press . Select Settings.
Select Tones .
Select Composed
melodies .
Select List .
Choose one of the registered
melodies select OK if you
want to modify the melody or
to play it and select
Delete if you want to
erase it from the phone mem-
ory.
Press . Select Settings.
Select Tones .
Select Composed
melodies .
Select Statistics .
!
!
6
7
8
1
2
3
4
5
1
2
3
4