- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
28
Balance information (subscrip-
tion dependent)
This service may be supplied by
your service provider. It allows to
get the remaining airtime balance
on your phone line.
Please contact your service pro-
vider for more information. If
your subscription allows access to
this information:
When selecting Call, if the bal-
ance information number
is already stored, a call is sent to
the balance information centre. If
no number is stored select Set
number and type it in. Press
OK to store the number, then
select Call to call the information
centre number.
Reminder - Call duration
You can set a duration reminder
to regularly beep to remind you of
the time spent on your call. The
occurence can be any multiple of
1 minute (up to 59 mins).
Call timer - reset
This feature allows to reset the
call timers. The 4 digit lock code is
needed to reset the call timers
(default lock code: '0000').
Call costs - management
Some service providers offer an
Advice of Charge (AoC) subscrip-
tion service allowing to get the
last call cost, the total calls cost
and the remaining balance on
your account (after you have set a
'credit limit' ).
To display these you first have to
set a currency value and to enter
an average cost per unit (only
calls units are displayed if the cost
information is not stored).
To set a currency value per unit:
Press . Select Calls &
Times.
Select Call timers .
Select Balance informa-
tion .
Select Call or Set number
.
Press . Select Calls &
Times.
Select Call timers .
Select Reminder .
Select On to activate the
Call timer.
Type the call timer interval
(e.g.: 2 = a beep is played
every 2 minutes while in con-
versation).
1
2
3
4
1
2
3
4
5
Press OK to validate the
entry.
Press . Select Calls &
Times.
Select Call timers .
Select Reset .
Select Yes .
Enter the phone lock code
and press OK .
Press . Select Calls &
Times.
Select Call costs .
Select Display cost type .
Select Currency . The cur-
rent currency unit value is dis-
played.
Select Modify . Enter your
PIN 2 code and press OK .
Enter the currency name (up
to 4 letters). Press OK to
validate.
6
1
2
3
4
5
1
2
3
4
5
6