- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
12
The four arrows indicate features
can be reached via the four ar-
rows on the cursor key.
The oval symbol underneath the
arrows shows the Menu can be
reached by pressing on the
key (below the cursor key).
WAP™
and SMS indicate you can
directly access the WAP™ and
SMS services by pressing on the
softkeys. The features linked
to the softkeys in stand by
mode depend on your service pro-
vider. These keys may not have
been programmed. You can then
program them by pressing and
holding them, thus reaching a list
of programmable functions.
Choose one by scrolling with the
and keys, and validate by
selecting OK .
is also displayed if your mobile
is connected to a GPRS network
1
.
Keypad lock
When activated the keypad lock
feature prevents accidental calls
or actions being made by while
the phone is carried in a pocket or
a bag for instance. Incoming calls
can however be received and an-
swered. When the call is over the
keypad lock is automatically reac-
tivated.
To activate the keypad lock:
To deactivate the keypad lock:
Alert tones
Press to directly access the
Alert tones control (Ring, Silent,
Vibrate, Vibrate & ring, Vi-
brate then ring).
Turning the phone off
A tone sounds to confirm your ac-
tion. An animated screen is dis-
played while the mobile switches
off.
Power saver
To allow you to enjoy optimised
use of your mobile a power saver
screen is automatically displayed
after one minute when the phone
is not being used. It displays your
service provider name and the
time.
The power saver does not prevent
any operation. You can thus get a
call, a SMS, a melody, an image,
etc. while the power saver is on.
Pressing any key allows return to
an active screen.
1.GPRS availability is operator dependent
Press and hold . is dis-
played.
Select Unlock and
press .
Press and hold .
Do not take the battery out of the mobile without tur-
ning the phone off. Data might be lost. Should this
happen a first-aid kit symbol is displayed at next acti-
vation of the mobile.
!