- Alcatel Owner's Manual Mobile Telephone One Touch 531
Table Of Contents
- English
- One TouchTM 531
- Introduction
- Using this guide
- Getting Started
- Network services
- Phone Book
- Messages
- Calls & Times
- Settings
- Key
- Action
- Feature
- Default setting
- Divert options
- Action
- Option
- Description
- Select
- Meaning
- Pass word
- Length
- Number of al lowed trials
- If blocked or forgot ten
- Phone lock code
- 4 digits
- Unlimited
- Return phone to manufac turer
- PIN
- 4-8 digits
- 3
- Un blocked by use of PUK code
- PIN2
- 4-8 digits
- 3
- Un blocked by use of PUK2
- PUK
- 8 digits
- 10
- Contact your service provider
- PUK2
- 8 digits
- 10
- Contact your service provider
- Call bar ring pass word
- 4 digits
- Defined by service provider
- Contact your service provider
- Office Tools
- Connectivity
- Games
- WAP™
- To enter and store the profile details via the Assistant
- To enter and store the profile details in standard mode
- 1.All the requested parameters are obtainable from your network operator and/or services provider.
- 2. The phone number or access point name, the login and the password are automatically stored in the Con nection Manager (see Connection manager, page 51).
- 3. A profile name cannot be stored twice. If an error message is displayed please also check the profile names in the Connection profiles (see Connection manager, page 51).
- 4. Access to the connection settings may depend on the pre-programmation of the settings. The connection settings menu may not be available in some cases. These settings may be 'Locked' and not be user pro grammable.
- 5. You can request the activation of the security fea ture from the profiles list (Settings / Activate security).
- 6. Your service provider may require to have the secu rity context reset. Select Yes.
- Getting to the Options menu while online.
- Ending the online connection
- Creating bookmarks
- Using bookmarks
- Other site
- Receiving push messages
- Melodies download
- Customising your mobile
- Wallpaper
- Logo
- Appendix
- 1. use not conforming with the instruc tions for use or installation,
- 2. non observation of the technical and safety standards applicable in the country where the equipment is used,
- 3. improper maintenance of batteries and other sources of energy, and of the overall electric installation,
- 4. accidents or the consequences of theft, (of the vehicle), acts of vandal ism, lightning, fire, humidity, infiltra tion of liquids, atmospheric influences,
- 5. combination or integration of the equipment in hardware not supplied or not recommended by Alcatel, without express written consent for such,
- 6. modifications, alterations, or repairs carried out by parties not authorised by Alcatel, the dealer or the approved maintenance centre,
- 7. use of the equipment for a purpose other than that for which it was de signed,
- 8. normal wear,
- 9. deterioration caused by external caus es (RF interference produced by other equipment, fluctuations in mains volt age and/or voltages on telephone lines, etc),
- 10. modifications made to the equipment even if they are unavoidable due to changes in regulations and/or modifi cation of network parameters,
- 11. connection faults resulting from unsat isfactory radio transmission or caused by the absence of radio relay coverage.
- A
- B
- C
- D
- E
- F
- G
- I
- K
- L
- M
- N
- O
- P
- R
- S
- T
- V
- W
11
Getting Started
Getting Started
Preparing the phone for
operation
Please refer to the 'Getting started with
your One Touch™ 531 booklet.
Basic Operations
Turning the phone on
Making a call
The phone can make and receive
calls only when it is switched on,
when a valid SIM card is inserted
and when it is connected to a
GSM network service.
If the keypad is locked you can re-
ceive calls but you cannot make
any call (see Keypad lock,
page 12).
Please refer to the ’Getting start-
ed with your One Touch™ 531
booklet for instructions on how
to make a call.
Holding your phone
The standby display
When switched on the mobile
searches connection with the net-
work. When the connection is es-
tablished a tone sounds and the
network and/or service provider
name or logo are displayed to-
gether with the time and date,
the signal strength and the bat-
tery charge level. If the mobile
cannot find a valid network the
signal strength and the operator
name are not displayed.
Press and hold . A tone
sounds at mobile activation.
When switching the mobile on
for the first time may be
displayed.
Enter the date & time settings
or select Exit if the set-
tings are fine.
If your SIM card is PIN pro-
tected, Enter PIN is dis-
played.
Enter the PIN code and select
OK .
1. Please also see your 'Getting Started with your
One Touch
TM
531 booklet.
2. Please refer to Security codes, page 6 and to Secu-
rity features, page 39 for more details on your PIN
and lock codes.
1
2
!
Please be warned that you should not, when using
the hands free mode, put the phone to your ear.
How to hold
the phone
Avoid
covering the
upper back
half of the phone
so as to allow maxi-
mum emission
and reception quality.