Network Card User Manual

Configuring Bridge MIB Extensions
3-21
Configuring Bridge MIB Extensions
The Bridge MIB includes extensions for managed devices that support Traffic
Classes, Multicast Filtering and Virtual LANs. To configure these extensions, use the
Extended Bridge Configuration screen as shown below:
Bridge Capability
Parameter Description
Extended Multicast
Filtering Services
Indicates that the switch does not support the filtering of individual multicast
addresses based on GMRP (GARP Multicast Registration Protocol). Note
that this function is not implemented in the current firmware release.
Traffic Classes Indicates that the switch provides mapping of user priorities to multiple traffic
classes. (Refer to the Priority menu on page 3-23.)
Static Entry Individual
Port
Indicates that the switch allows the static filtering of unicast and multicast
addresses. (Refer to the Address Table Configuration on page 3-14.)
VLAN Learning This switch uses Independent VLAN Learning (IVL), whereby each port
maintains its own VLAN filtering database.
Configurable
PVID Tagging
Indicates that the switch allows you to override the default PVID setting (Port
VLAN ID used in frame tags) and its egress status (VLAN-Tagged or
Untagged) on each port. (Refer to VLAN Port Configuration on page 3-30.)
Local VLAN Capable This switch does not support multiple local bridges (that is, multiple Spanning
Trees).