user manual

2 Config Commands
36 / 138
3EC 16982 AGAA TCZZA Ed. 01
config load
Load complete saved or default configuration. Execute config flush prior to config load.
In case the saved configuration is loaded (defaults=no) this combines all load commands: bridge
load, dhcp load, dns load, phonebook load, pptp load, system load and optionally ip load.
SYNTAX:
config load [load_ip = <{no|yes}>]
[config_set = {saved|defaults}]
[load_ip] Load IP settings (yes) or not (no).
Not specifying thisd parameter preserves the current IP configuration.
OPTIONAL
[config_set] Load saved configuration (saved) or default configuration (defaults).
Not specifying this parameter loads the saved configuration
OPTIONAL
RELATED COMMANDS:
config erase Physically remove all saved configurations.
config flush Flush complete runtime configuration.
config reset Flush current and optionally restore default configuration.
config save Save current runtime configuration.