user manual

1 Bridge Commands
23 / 138
3EC 16982 AGAA TCZZA Ed. 01
bridge flush
Flush complete bridging configuration.
The flush command does not impact previously saved configurations.
SYNTAX:
bridge flush
EXAMPLE:
=>bridge portlist
0 OBC state: forwarding
RX bytes: 75783 frames: 572
TX bytes: 82768372 frames: 341221 dropframes: 0
1 eth0 state: forwarding
RX bytes: 156344216 frames: 5899238
TX bytes: 75689 frames: 425 dropframes: 5558017
2 Br1 state: forwarding
vpi: 8 vci: 35 protocol: vc-muc
fcs: off compression: off
RX bytes: 75 frames: 12
TX bytes: 30246 frames: 91 dropframes: 0
=>bridge flush
=>bridge portlist
0 OBC state: forwarding
RX bytes: 75783 frames: 572
TX bytes: 82768372 frames: 341221 dropframes: 0
1 eth0 state: forwarding
RX bytes: 156344216 frames: 5899238
TX bytes: 75689 frames: 425 dropframes: 5558017
=>
RELATED COMMANDS:
bridge load Load saved or default bridge configuration.
bridge save Save current bridge configuration.