user manual

13 / 138

3EC 16982 AGAA TCZZA Ed. 01

You can break off a command by pressing Ctrl+G". This can be useful in a situation where a user

is prompted to enter a value which it does not know and wants to abort the command. Instead of

being prompted over and over again for the same value, this allows to break of the command.

In the example below Ctrl+G" is pressed after the third prompt `name =`. The command is

broken of and the user returns to the command line.

EXAMPLE:

[phonebook]=>add

name =

Ctrl+G"

[phonebook]=>

History of Commands

To retake previous commands press the up arrow    and come back to more recent commands

with the down arrow   . Press Enter (

↵)" to select and execute the retaken command.

EXAMPLE:

=>phonebook

[phonebook]=>list

Name address type usage

Br1 8*35 bridge configured

Br2 8*36 bridge free

Br3 8*37 bridge free

Br4 8*38 bridge free

RELAY_PPP1 8*48 pptp configured

RELAY_PPP2 8*49 pptp configured

RELAY_PPP3 8*50 pptp configured

RELAY_PPP4 8*51 pptp configured

[phonebook]=>

  

[phonebook]=>:phonebook list