user manual

8 Software Commands
121 / 138
3EC 16982 AGAA TCZZA Ed. 01
software switch
Switch active and passive versions and reboot the SpeedTouch350i.
Because rebooting implies a flush of all nonsaved configurations it is highly recommended to save
the current configuration if needed, e.g. by executing the config save command prior to executing
a software switch.
SYNTAX:
software switch
EXAMPLE:
=>Software version
Active : Sascha3.254 Passive : Sascha3.280
=>software switch
.....
(after reboot and re-opening the Telnet session)
.....
=>Software version
Active : Sascha3.280
Passive : Sascha3.254
=>
RELATED COMMANDS:
software version Show active and passive software versions.
system reboot Reboot the SpeedTouch350i.