User manual

Introduction
Procedure
9 Maintenance - Speed Touch ToDefaults
79 / 104
3EC 36228 AAAA TCZZA Ed. 01
9.2.3 SwitchtoDefaults
At the back of the AST350i there is a small push button labeled
"Defaults".
Via this button a hardware reset of the AST350i, the
SwitchtoDefaults, is possible.
Proceed as follows:
1. Make sure your AST350i is turned on.
2. Use a pencil to press the push button at the back of the AST350i.
3. Release the button. Via the flashing front panel LEDs, you will
notice that the AST350i will reboot.
Wait to allow the POST to end. The AST350i will come online
with manufacturing defaults.
4. After a reset to original defaults a reconfiguration of
AST350i's IP address might be necessary. This because the
reset to defaults also resets your AST350i's IP address to its
default value 10.0.0.138.