User manual

'DHCP Server Startup
Mode' radiobuttons
Configuring the
AST350i for a LAN
without DHCP
Configuring the
AST350i as DHCP
server
Configuring the
AST350i as DHCP client
6 Networking Services - IP, DHCP and DNS
62 / 104
3EC 36228 AAAA TCZZA Ed. 01
The 'DHCP Server Startup Mode' radiobuttons allow to configure
the AST350i DHCP server mode.
To setup the AST350i without DHCP, tick .
In this configuration, it is assumed that all members, the AST350i
included, have static IP addresses.
See subsection 6.2 for static IP addressing of the AST350i.
Note: This configuration might be required in case you use the Transparent
Bridging packet service.
To setup the AST350i as DHCP server, tick .
Via the 'DHCP Server Configuration' tables, you can configure the
AST350i DHCP server settings.
IP Address
AST350i DHCP
Server
Internet
Access Point
ATM
Network
Note: This setting might cause side effects with Bridging. See section 6.1.1 for
more information.
To setup the AST350i as DHCP client, tick on the
'DHCP' page.
IP Address
Internet
Access Point
ATM
Network
DHCP Client
IP Address
DHCP Server
AST350i