User manual

Bridged PPPoE
configuration
Using Bridged PPPoE
2 Speed Touch Configuration Guide
30 / 104
3EC 36228 AAAA TCZZA Ed. 01
2.3.4 Bridged PPPoE Packet Service Configuration
As the Bridged PPPoE packet service implies nothing more than
using the AST350i Transparent Bridging packet service, no
specific configuration for Bridged PPPoE is required on the
AST350i.
However, you may need to configure the Transparent Bridging
packet service of the AST350i in order to meet the requirements
of your SP regarding VC(s) and encapsulation.
For more information on the configuration of the Bridging packet
service, see chapter 3.
To use Bridged PPPoE, a PPPoE client must be installed on your PC.
The SP will provide the PPPoE client software. Contact him for
more information.