User Manual

— 28 —
Motion and Mask Options
u
Follow steps 1 through 3 on page
21 to access the Main Menu. Tap
Recorder Setup icon to access
the Record Setup screen.
v
Tap the Motion icon. Tap the
desired camera to select it and
again to set the desired motion
setting to PIR (Uses Advance
Motion settings), Low, Mid or
High.
w
This Motion Mask feature will
allow you to mask areas of the
screen from detecting motion and
activating the motion detector
recording for that area. For
example, if a pet sets off the
sensor, you can mask the lower
areas that the pet would be visible
in, or if a tree branch moving in
the wind sets it off, you can mask
the areas where the tree branch is
in the video.
Tap the Motion Mask icon on
the left menue. Tap the desired
camera twice. Tap a block to
mask it; “V” will disappear. To un-
mask a block, simply tap it again;
“V” will appear.
Main Menu
Camera Setup
Motion Area
Block or Unblock Grid
Detection Setup
Additional setup options
When done setting, tap the icon to return
to the previous screen.
MAIN MENU