Wireless Video Surveillance System 7” Touch Screen Wireless Surveillance System AWS3377: 2 Camera System AWS337: 1 Camera System Model AWS3377/AWS337 User Guide Wireless Made Simple. Please read these instructions completely before operating this product.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS..............................................................................3 INTRODUCTION..................................................................................................................6 System Contents................................................................................................................6 Getting to Know Your LCD Touch Screen Monitor..............................................................
TABLE OF CONTENTS Android-WDVR Main Screen and Icons............................................................................48 Android-Recording...........................................................................................................49 Android-Event List............................................................................................................51 Android-Camera Pairing...................................................................................................
IMPORTANT SAFETY INSTRUCTIONS PRODUCT SAFETY: When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. Improper use of this product can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock do not remove cover (or back).
IMPORTANT SAFETY INSTRUCTIONS Recycling and Disposal Information: • Do not dispose of electronic devices or any of their components (especially batteries and LCD displays) in your municipal trash collection. • Consult your local waste management authority or a recycling organization like Earth911.com to find an electronics recycling facility in your area. CAUTION: Rechargeable batteries must be recycled or disposed of properly.
IMPORTANT SAFETY INSTRUCTIONS 8. Uninterruptible Power Supplies (UPS) - Because this product is designed for continuous, 24/7 operation, it is recommended that you connect the product to an uninterruptible power supply. An uninterruptible power supply has an internal battery that will keep the product running in the event of a power outage. Uninterruptible power supplies should bear the UL listing mark or CSA certification mark. CAUTION: Maintain electrical safety.
INTRODUCTION System Contents After unpacking, you will have the following items: Monitor x 1 Camera x 2 (AWS3377) Camera x 1 (AWS337) MONITOR SETUP Phillips head screwdriver or drill may be required for installation Model AWS3377/AWS337 Tools Quick MONITOR SETUP Simple Set Up Interne Included Ethernet Cable AC power cable NOTE: Avoid installing in a location which requires the wireless signal to pass through cement, concrete and metal structures. This will reduce the transmission range.
INTRODUCTION Getting to Know Your LCD Touch Screen Monitor Wireless Signal Indicator Power Indicator Monitor Touch Screen Power Button Antenna Jack Reset Button USB Jack Network Jack SD Card Slot Stand Power Jack —7—
INTRODUCTION Getting to Know Your Camera FRONT Power Status LED Link Status LED Passive Infrared Sensor REAR Mounting Socket Antenna Connector Pairing Button Power Pigtail Microphone —8—
INSTALLATION Installation Tips WARNING: Weatherproof, IP66 rated cameras are suitable for outdoor installation. However, if possible, it is recommended to install in a location that provides some shelter from the elements, such as beneath roof eaves. • Before you install the camera, plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. • Optimized motion detection range is 6 - 18 feet for camera.
INSTALLATION Setting Up the Monitor u Flip out the stand on the back of the monitor. Connect the AC adapter to the Power Jack on the side of the monitor. v Connect the internet cable from the rear of the unit to your router. Internet Router (not included) w Screw Antenna (white antenna) clockwise into rear of camera and put into the upright position. Rotate and pull out the stand. TIP: You can use a USB mouse for easier navigation.
INSTALLATION Setting Up the Monitor x Insert an SD Card (up to 128GB) into the SD Card Slot. You can also connect an HDD drive or Flash drive into the USB jack. This will allow you to record videos. NOTES • It is recommended to use a 2TB HDD drive for long term use. • The max USB power for an HDD/Flash drive is 5V/1000mA. Use an external power supply for the drive if it is more. • Format the drive/SD Card before using, see page xx. y Connect the AC adapter to the Power Jack on the side of the monitor.
INSTALLATION Installing the Camera(s) u If not mounting, but just using on a flat surface (desk, table, etc.), skip to step 4. v Secure the multi-position Camera Bracket to a stable surface, ceiling or wall using the three supplied screws. If needed, three anchors are also included. w Loosen the T-Bolt on the Camera Bracket and adjust viewing angle using the Thumb Screw to rotate position.
INSTALLATION Installing the Camera(s) y Screw antenna clockwise into rear of the camera. U Connect one end of an AC adapter to the camera’s power pigtail and plug the other end of the adapter to a 120 volt AC (standard indoor) power outlet. V Make sure the Power status LED turns red and the Link Status LED turns green. If it doesn’t, try reconnecting the AC adapter, and make sure the power outlet is not controlled by a wall switch. You should now have video on your Live screen.
SYSTEM INTRODUCTION Live Screen and Menu Your monitor’s system software operates through a series of screens that let you choose groups of operations. For example, when you tap on the camera icon in the Pop-up menu, you can set how you want the main viewing screen (“Live screen”) to display images from the paired cameras. You can scan between cameras, show all cameras on a single screen (Quad view or Smart Quad view), or only display a specific camera. The Live screen lets you view the camera transmissions.
SYSTEM INTRODUCTION Description of Icons Icon Icon Description Open Tap to open the Settings menu. Options Tap to enter the Main Menu, see page 18. Quad Display Tap to select Quad Display. Smart Quad Display Tap to select Smart Quad Display. Record One Camera Tap to start recording the selected camera; the Record icon will appear. Tap again to stop recording.
SYSTEM INTRODUCTION Description of Icons Icon Record All Cameras Icon Description Tap to start recording from all cameras; the Record icon will appear. Tap again to stop recording. Volume Tap to mute or change volume setting. Close Tap to close the Settings menu.
SYSTEM INTRODUCTION Live Screen Displays The Live screen displays in three views - Quad View, Smart Quad view or Full View. Quad View divides the screen’s image area into four quadrants and displays camera video in each quadrant. If less than four cameras are connected and on, only those cameras’ videos will display on the Live screen. Smart Quad will show one large camera views and up to three smaller camera views. Full view displays a single camera’s video on the entire screen.
SYSTEM INTRODUCTION Camera Views To change camera views, perform the following: u Tap on the Open/Close icon to open the Menu options. SD C1 1080p V C1 2017/07/05 09 : 34 : 18 v 2017/07/05 09 : 34 : 18 Tap the Quad or Smart Quad icon. SD C1 1080p C1 1080p V 2017/07/05 09 : 34 : 18 w The display will change to the selected Quad camera display. Tap one of the screens to view that screen only.
SYSTEM INTRODUCTION Adjusting the Volume Adjust the camera’s audio on the monitor as follows: u Tap on the Open/Close icon to open the Menu options. SD C1 1080p V C1 2017/07/05 09 : 34 : 18 v Tap the Speaker icon repeatedly to set the sound from mute to one of three volume settings.
SYSTEM INTRODUCTION Recording Live Video u Make sure a Micro SD card, HDD or Flash Drive is installed, see page 11. Tap on the Open/Close icon to open the Menu options. SD C1 1080p V C1 2017/07/05 09 : 34 : 18 v Tap the Record icon to start recording the selected camera/ screen (REC appears on the top left side of screen) or the Record All icon to record all cameras/screens; the Record indicator will appear at the top right of the screen.
MAIN MENU Main Menu u Tap on the Open/Close icon to open the Menu options. SD C1 1080p V C1 2017/07/05 09 : 34 : 18 v Tap the Options icon to enter the Main Menu. SD 1080p 2017/07/05 09 : 34 : 18 C1 C1 1080p V TIP: Entering the Main Menu while recording will stop the recording process. w 2017/07/05 09 : 34 : 18 The following screen will appear. See the following pages for the System settings.
MAIN MENU Camera Pairing Your cameras are paired to the monitor at the factory to channels 1 and 2 (only camera 1 for AWS337). When you add a new camera to your system, you have to “introduce” the camera and monitor to each other so they can communicate. u Follow steps 1 through 3 on the previous page to access the Main Menu. Tap Camera Setup icon to access the Camera Setup screen. Main Menu Camera Setup v Tap the desired camera to pair. TIP: You can pair up to 4 cameras.
MAIN MENU Turning a Camera On or Off u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Camera Setup icon to access the Camera Setup screen. Main Menu Camera Setup v Tap the desired camera that you want to turn on or off. w Repeatedly tap the On/Off icon to cycle between On or Off. When done setting, tap the icon to return to the previous screen.
MAIN MENU Setting HD Option u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Camera Setup icon to access the Camera Setup screen. Main Menu Camera Setup v Tap the HD icon repeatedly to change it from 1080 to 720. 1080 will look better but 720 will provide a better frame rate which is optimal when viewing on a mobile device. When done setting, tap the icon to return to the previous screen.
MAIN MENU Setting the Image Quality u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Camera Setup icon to access the Camera Setup screen. Main Menu Camera Setup v Tap the Image Quality icon repeatedly to change it from High to Low. High quality will produce a better video display quality, but the system will lower the display frame rate as compensation. Lower quality will produce a better display frame rate,but the system will lower the quality as compensation.
MAIN MENU Schedule Recording u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Recorder Setup icon to access the Record Setup screen. Main Menu Camera Setup v Tap the Record Schedule icon. MON AM11 10 PM02 10 TUE AM11 10 PM02 10 WED AM11 10 PM02 10 SAT AM11 10 PM02 10 SUN-SUN AM11 10 PM02 10 Recorder Schedule For all cameras w Tap the desired camera to set, or all cameras.
MAIN MENU Schedule Recording x Tap the first column and then tap the + or – icon to select the following: : Select this for continuos recorgings using a specific time and day. MON AM11 10 PM02 10 TUE AM11 10 PM02 10 WED AM11 10 PM02 10 SAT AM11 10 PM02 10 SUN-SUN AM11 10 PM02 10 Recorder Schedule For all cameras : Select Motion Detection Recording to record only when motion is detected during the setup times and day(s).
MAIN MENU Motion and Mask Options u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Recorder Setup icon to access the Record Setup screen. Main Menu Camera Setup v Tap the Motion icon. Tap the desired camera to select it and again to set the desired motion setting to PIR (Uses Advance Motion settings), Low, Mid or High. w This Motion Mask feature will allow you to mask areas of the screen from detecting motion and activating the motion detector recording for that area.
MAIN MENU Detection Options u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Recorder Setup icon to access the Record Setup screen. Main Menu Camera Setup v Tap the Detection Setup icon. Detection Setup Additional setup options w Tap the options as follows: Motion Record Time: Repeatedly tap to set the time the unit will record when motion is detected (30, 60 or 120 seconds). Record time may be longer is motion continues.
MAIN MENU Event List u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Event List icon to access the Event List screen. Main Menu Camera Setup v 2016 NOV Tap on the day containing the recording you want to view or on a specific camera to view only that camera’s recordings. NOTE: An asterisk (*) will appear next to any dates with recordings. Nothing will happen if you tap a date that has no recordings.
MAIN MENU Event List x Tap on the Open/Close icon to open the playback options. C1 V The bottom control buttons will control the following: 7 4 ; Tap to rapidly rewind the playback. g Tap to stop the playback. 8 C1 2017/07/05 09 : 34 : 18 2017/07/05 09 : 34 : 18 Tap to play back the recording. Tap to pause the playback. Tap to advance the playback. When done setting, tap the icon to return to the previous screen.
MAIN MENU To Delete a Recording u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Event List icon to access the Event List screen. Main Menu Camera Setup v Tap on the day containing the recording(s) you want to delete. Tap on the box next to the recordings you want to delete, a check-mark will appear. 15 22 29 16 23 30 17 24 31 18 25 19 26 20 27 21 28 Detection Setup Additional setup options w Tap the Delete icon to delete the folder/file.
MAIN MENU To Copy a Recording u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Event List icon to access the Event List screen. Main Menu Camera Setup v Tap on the day containing the recording(s) you want to copy. Tap on the box next to the recordings you want to copy, a check-mark will appear.
MAIN MENU Setting the Date/Time u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap System Setup icon to access the System screen. Main Menu Camera Setup v w Tap the Day and Time icon. Tap the Up icon to increase or the Down button to decrease the Year, Month, Day, Hours and Minutes. 15 22 29 16 23 30 17 24 31 18 25 19 26 15 22 29 16 23 30 17 24 31 18 25 19 26 Detection Setup Additional setup options When done setting, tap the icon to return to the previous screen.
MAIN MENU Setting the Language u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap System Setup icon to access the System screen. Main Menu Camera Setup v Tap the Language icon. 15 22 29 w Tap the desired system language. Detection Setup Additional setup options When done setting, tap the icon to return to the previous screen.
MAIN MENU Setting the Image Appearance u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap System Setup icon to access the System screen. Main Menu Camera Setup v Tap the Display Setup icon. 15 22 29 w Tap the Signal Strength Indicator icon once to select it and repeatedly to turn on (icon will turn red) which will show the signal strength on the videos.
MAIN MENU Setting the Idle Display u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap System Setup icon to access the System screen. Main Menu Camera Setup v Tap the Idle Display Setup icon. 15 22 29 w This setting allows you to decide how the cameras will display during idle (when system is not in use). Detection Setup Additional setup options Tap to select Quad, Smart Quad, or 5 or 10 second Intervals. When done setting, tap the icon to return to the previous screen.
MAIN MENU Setting the Power Savings u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap System Setup icon to access the System screen. Main Menu Camera Setup v Tap the Power Saving Setup icon. 15 22 29 w Tap the desired time for which the display will remain on when idle, 5 minutes, 10 minutes or Always On. Detection Setup Additional setup options When done setting, tap the icon to return to the previous screen.
MAIN MENU Setting the Storage u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Storage Setup icon. Main Menu Camera Setup v Tap the Storage Setup icon. PLEASE SEND CORRECT DISPLAY Storage Status Select Storage Device for Recording w Select the desired drive to record onto: microSD Card (in the microSD slot) or the drive connected to the USB jack; a check mark will appear in the box.
MAIN MENU Formatting a Drive u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Storage Setup icon. Main Menu Camera Setup v Tap the Storage Format icon. PLEASE SEND CORRECT DISPLAY Storage Status Select Storage Device for Recording w Tap the desired drive to format once to select it and again to reformat it which will erase the drive and format it to be used with this system.
MAIN MENU Setting the Security Code and Internet Info u YOU MUST CHANGE THE SECURITY CODE BEFORE SETTING UP REMOTE ACCESS. Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Storage Setup icon. Main Menu Camera Setup v Tap the Security Code icon. PLEASE SEND CORRECT DISPLAY Storage Status Select Storage Device for Recording w Tap the security code field, enter a new code and then tap Enter then OK.
MAIN MENU System info and Upgrading u Follow steps 1 through 3 on page 21 to access the Main Menu. Tap Storage Setup icon. Main Menu Camera Setup v Tap the System Info icon. PLEASE SEND CORRECT DISPLAY Storage Status Select Storage Device for Recording w The info on the system will appear. Tap About to view the Open Source Software Info. Tap Upgrade to see if there is a firmware update and to upgrade the firmware. This will add features and/or fix any issues in the software.
REMOTE ACCESS Overview This camera system allows you view live video from an iPhone®, iPad®, iPod Touch® or AndroidTM smartphone or tablet. Free apps are available through the Apple App Store or the Android Market/Google Play. Up to three remote users can access live video at the same time as long as they have the User ID (DID) Code and Security Code. IMPORTANT: The number of remote viewers is determined by the amount of “available upload bandwidth” on your home network.
REMOTE ACCESS WDVR Android Setup Wizard u Launch the WDVR App and the Devices screen will appear. Tap New to start the setup. v Tap Scan QR and scan in the QR code located on the rear of the monitor. The device ID will automatically be entered.
REMOTE ACCESS WDVR Android Setup Wizard w Enter a device name. Also enter the password, but it is VERY important that 1) the password was changed from the default 123456 on the monitor and 2) the password is entered exactly as it on the monitor. x Tap Add New. Tap the camera in the Connection List followed by the button to view the camera(s). NOTE: To delete camera from the list, press and hold on the camera name. Then tap Delete.
REMOTE ACCESS WDVR Apple Setup Wizard u Launch the WDVR App and the Devices screen will appear. Tap “+” to start the setup. v Tap QR code and scan in the QR code located on the rear of the monitor. The device ID will automatically be entered.
REMOTE ACCESS WDVR Apple Setup Wizard w Enter a device name. Also enter the password, but it is VERY important that 1) the password was changed from the default 123456 on the monitor and 2) the password is entered exactly as it is on the monitor. x Tap Save. Tap the camera in the Devices list followed by the button to view the camera(s). NOTE: To delete camera from the list, swipe left. Then, tap Delete.
REMOTE ACCESS WDVR Main Screen and Icons u Tap the camera in the Devices menu followed by the button to view the camera(s). Click anywhere on the screen to bring up the App icons. See below for icon descriptions Tap to view the recorded videos, see page xx for details Tap to ????? Push Notification when xx is set.
REMOTE ACCESS Recording u Tap the icon, then tap Record ON/OFF. v Tap one or more cameras/channels to record, the switches will show ON when activated.
REMOTE ACCESS Recording w Tap OK. x The unit will record the selected cameras/channels. To stop recording, repeat steps 1 and 2 to turn the respective switches off. Tap OK.
REMOTE ACCESS Event List u Tap the icon, then tap Playback. v Tap Storage and then the desired drive to view, i.e. SD Card.
REMOTE ACCESS Event List w Tap Channel and then the desired camera/channels to view its recordings. Tap View. x Then tap a date and then tap the time and the video will start playing back.
REMOTE ACCESS Recording Event List y The bottom control icons will control the following: 7 4 ; 8 Tap to rapidly rewind the playback. Tap to play back the recording. Tap to pause the playback. Tap to rapidly advance the playback.
REMOTE ACCESS Camera Pairing Your cameras are paired to the monitor at the factory to channels 1 and 2 (only camera 1 for AWS327). When you add a new camera to your system, you have to “introduce” the camera and monitor to each other so they can communicate. u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap the desired camera to pair. w Tap Pair icon then tap OK at the pop up screen, “Pair” will appear on the screen.
REMOTE ACCESS Turning a Camera On or Off u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap the desired camera that you want to turn on or off. w Tap the Activation switch to turn the selected camera on or off.
REMOTE ACCESS Setting HD Option u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap the desired camera that you want to set. w Tap to set the Resolution to HIGH or LOW as desired. HIGH will look better but LOW will provide a better frame rate which is optimal when viewing on a mobile device.
REMOTE ACCESS Setting the Image Quality u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap the desired camera that you want to set. w Tap to set the Quality to HIGH or LOW as desired. High quality will produce a better video display quality, but the system will lower the display frame rate as compensation. Lower quality will produce a better display frame rate,but the system will lower the quality as compensation.
REMOTE ACCESS Schedule Recording u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Schedule. w Tap the desired camera to set, or ALL cameras then tap on a program.
REMOTE ACCESS Schedule Recording x Tap Recording Mode and then: Tap None to not set a schedule. Tap Schedule to set recording times using specific days or everyday. Tap Motion to set recording times that will record when motion is detected. y Tap Date to select the weekly cycle the recording will take place. For example, EVERYDAY, MONFRI, THURSDAY, etc. U Tap From and To to set the From and To times. Tap OK when done.
REMOTE ACCESS Motion and Motion Area Options u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Motion Sensitivity. Tap the desired camera and then set the desired motion setting to PIR (Uses Advance Motion settings), PIR Low, PIR Mid or PIR High. w This Motion Mask feature will allow you to mask areas of the screen from detecting motion and activating the motion detector recording for that area.
REMOTE ACCESS Detection Options u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Recording Options. w Tap the options as follows: Motion Length: Set the time the unit will record when motion is detected (30, 60 or 120 seconds). Record time may be longer is motion continues. Motion Alarm: Set the alarm to sound for 5 or 10 seconds when motion is detected, or turn off.
REMOTE ACCESS Setting the Date/Time u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Date. w Set the time the date and time. Tap Update when done.
REMOTE ACCESS Setting the Language u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Language. w Set the time the date and time. Tap the desired language.
REMOTE ACCESS Setting the Image Appearance u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Display. w Tap Signal Indicator to turn it on (icon will turn green) which will show the signal strength on the videos. Tap again to turn off. Tap Record Date/Time to turn it on (icon will turn green) which will show the time and date on the videos. Tap again to turn off.
REMOTE ACCESS Setting the Idle Display u Tap the icon, then tap Remote Setting to access the System Setup screen. . v Tap Idle Display. w This setting allows you to decide if the cameras will display in quad mode or if they will cycle individually in 5 or 10 second intervals. Tap to select Quad, Smart Quad, or 5 or 10 second Intervals.
REMOTE ACCESS Setting the Power Savings u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Power Saving. w Tap the desired time for which the display will remain on when idle, 5 minutes, 10 minutes or Always On.
REMOTE ACCESS Setting the Security Code and Internet Info u YOU MUST CHANGE THE SECURITY CODE BEFORE SETTING UP REMOTE ACCESS. Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Network Status. w Tap the security code field and enter a new code. Tap either DHCP or Static IP: DHCP: DHCP is the most common connection. When selected, your router will automatically assign an IP address to this camera system.
REMOTE ACCESS Setting the Storage u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Storage Status. w Select the desired MAIN drive to record onto: microSD Card (in the microSD slot) or the drive connected to the USB jack; a check mark will appear in the box. To allow the unit to record over old files, select the device and the change to Overwrite.
REMOTE ACCESS Formatting a Drive u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Storage Format. w Tap the desired drive to format which will erase the drive and format it to be used with this system. Confirm by pressing the OK button.
REMOTE ACCESS System Info u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap System Info. w The info on the system will appear. On this page you can also turn on the RF Power Advance option.
REMOTE ACCESS Setting the Push Setting u Tap the icon, then tap Remote Setting to access the System Setup screen. v Tap Push Notification Setting. w Tap the Push Interval and Push Time period.
REMOTE ACCESS WDVR Main Screen and Icons u Tap the camera in the Devices menu followed by the button to view the camera(s). Click anywhere on the screen to bring up the App icons. See below for icon descriptions Tap to take a snapshot/picture of the screen Tap to view camera(s) Tap to stop live view Tap to record or stop recording, see page 73 for details Tap to view the recorded videos, see page 75 for details Tap to ????? Push Notification when xx is set.
REMOTE ACCESS Recording u Tap the Record icon. v Tap one or more cameras/channels to record, the switches will turn green when selected.
REMOTE ACCESS Recording w Tap Done. x The unit will record the selected cameras/channels. To stop recording, repeat steps 1 and 2 to turn the respective switches off . Tap Done.
REMOTE ACCESS Event List u Tap the Event icon. v Tap the selected drive to view, i.e. SD Card.
REMOTE ACCESS Event List w Tap a camera/channels to view its recordings. Then, tap on the desired recording date. x Tap the desired time and the video will start playing back.
REMOTE ACCESS Recording Event List y The bottom control icons will control the following: 7 4 ; 8 Tap to rapidly rewind the playback. Tap to play back the recording. Tap to pause the playback. When paused or stopped you can tap the date in the top left corner to go to the previous screen. Tap to rapidly advance the playback.
REMOTE ACCESS Camera Pairing Your cameras are paired to the monitor at the factory to channels 1 and 2 (only camera 1 for AWS337). When you add a new camera to your system, you have to “introduce” the camera and monitor to each other so they can communicate. u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap the desired camera to pair. w Tap Pairing, “Pairing” and a countdown will appear on the screen.
REMOTE ACCESS Turning a Camera On or Off u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap the desired camera that you want to turn on or off. w Tap the Active switch to turn the selected camera on or off.
REMOTE ACCESS Setting HD Option u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap the desired camera that you want to set. w Tap to set the Resolution to HIGH or LOW as desired. HIGH will look better but LOW will provide a better frame rate which is optimal when viewing on a mobile device.
REMOTE ACCESS Setting the Image Quality u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap the desired camera that you want to set. w Tap to set the Quality to HIGH or LOW as desired. High quality will produce a better video display quality, but the system will lower the display frame rate as compensation.
REMOTE ACCESS Schedule Recording u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Record Schedule. w Tap the desired camera to set, or all cameras.
REMOTE ACCESS Schedule Recording x Tap Off to not set a schedule. Tap Schedule to set recording times using specific days or everyday. Tap Motion to set recording times that will record when motion is detected. y Tap Date to select the weekly cycle the recording will take place. For example, EVERYDAY, MONFRI, THURSDAY, etc. U Tap From and To to set the From and To times. The unit will then record (or only record when motion is detected) at the dates and times selected.
REMOTE ACCESS Motion and Motion Area Options u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Motion Sensitivity. Tap the desired camera and then set the desired motion setting to PIR (Uses Advance Motion settings), PIR Low, PIR Mid or PIR High. w This Motion Mask feature will allow you to mask areas of the screen from detecting motion and activating the motion detector recording for that area.
REMOTE ACCESS Detection Options u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Detection Setup. w Tap the options as follows: Motion Record Time: Set the time the unit will record when motion is detected (30, 60 or 120 seconds). Record time may be longer is motion continues. Motion Detection Alarm: Set the alarm to sound for 5 or 10 seconds when motion is detected, or turn off.
REMOTE ACCESS Setting the Date/Time u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Date and Time. w Set the time the date and time. Tap Set to Now to set the time as per the apple device.
REMOTE ACCESS Setting the Image Appearance u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Display Setup. w Tap RSSI to turn it on (icon will turn green) which will show the signal strength on the videos. Tap again to turn off. Tap Record Date/Time to turn it on (icon will turn green) which will show the time and date on the videos. Tap again to turn off.
REMOTE ACCESS Setting the Idle Display u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Idle Display. w This setting allows you to decide if the cameras will display in quad mode or if they will cycle individually in 5 or 10 second intervals. Tap to select Quad, Smart Quad, or 5 or 10 second Intervals.
REMOTE ACCESS Setting the Power Savings u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Power Saving. w Tap the desired time for which the display will remain on when idle, 5 minutes, 10 minutes or Always On.
REMOTE ACCESS Setting the Push Setting u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Push Setting. w Tap the Push Interval and Push Time period.
REMOTE ACCESS Setting the Storage u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Storage Status. w Select the desired drive to record onto: microSD Card (in the microSD slot) or the drive connected to the USB jack. To allow the unit to record over old files, select Cycle. Select Without Cycle to deactivate.
REMOTE ACCESS Formatting a Drive u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Storage Format. w Tap the desired drive to format which will erase the drive and format it to be used with this system. Confirm the formating by pressing the OK button.
REMOTE ACCESS Setting the Security Code and Internet Info u YOU MUST CHANGE THE SECURITY CODE BEFORE SETTING UP REMOTE ACCESS. Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap Network Status. w Tap the security code field and enter a new code. Tap either DHCP or Static IP: DHCP: DHCP is the most common connection. When selected, your router will automatically assign an IP address to this camera system.
REMOTE ACCESS System Info u Tap the camera in the Devices menu followed by the button to view the cam. Tap the System Menu icon to access the System Setup screen. v Tap System Information. w The info on the system will appear.
MAINTENANCE Monitor As you use your touch-screen monitor, fingerprints, etc. will appear on the screen. Keep the screen clean by wiping it with a microfiber cloth. It is not recommended to use any chemicals or harsh detergents on the touch screen. Cameras When dust and grime builds up on the camera lens and glass, it will affect the night vision capability. The infrared light reflects off of the dust and grime, limiting the camera’s “vision.
TROUBLESHOOTING If you have any trouble with your system, try these simple steps which should handle most common issues. Problem Possible Solution Make sure the camera’s power is on. Connect it to the included adapter. No Image. Move the camera closer to the monitor; it might be out of range or flip the antenna of the monitor and/or camera to obtain best possible reception. If the monitor is connected to a PC, no image will appear. Poor picture quality. The motion sensor does not respond to movement.
TROUBLESHOOTING Problem System has locked up. Possible Solution Turn off the monitor and restart. If power button does not respond, use a pin to press the Reset button located on the side of the monitor. Make sure the camera is plugged in and the red LED is on; see page 13. The camera’s signal status icon shows no bars. Make sure the camera is paired to the correct channel; see page 12. Re-pair the camera to the monitor.
PRODUCT SPECIFICATIONS Camera Transmission Distance ..................................................................... 300 Meters in open space Image Resolution .................................................................................... 1920 x 1080 (Full HD) Housing ..................................................................................... IP66 weather resistance metal Viewing Angle ................................................................................................
WARRANTY One-Year Limited Warranty Important: Evidence of original purchase is required for warranty service. Atoms Labs LLC (“ALC”) ELEMENTS OF WARRANTY: ALC warrants, if properly installed and used thereafter in strict accordance with the use and care guidelines provided in the instructions manual, the Product shall be free from manufacturing defects in material and workmanship for one (1) year from the documented date of purchase.
WARRANTY ONE-YEAR LIMITED WARRANTY IMPORTANT: Evidence of original purchase is required for warranty service. LEGAL REMEDIES: This limited warranty gives you specific legal rights, and you may also have other WARRANTOR: Atoms Labsstate LLC (“ALC”) ELEMENTS OF WARRANTY: ALC warranty covers the for one (1)venue year rights which vary from to state. All parties irrevocablyThe submit themselves to product the exclusive frompersonal the documented date of of purchase.
Wireless Made Simple. ALCWireless.com 062217_v1.
Wireless Made Simple. ALCWireless.
