Full Product Manual

— 44 —
REMOTE ACCESS
Advanced Settings
MOTION MASK: This option is only visible
when the Software option under Detect Mode
has been activated. This feature will allow you
to mask areas of the screen from detecting
motion and activating the motion detector
recording for that area. For example, if a pet
sets off the sensor, you can mask the lower
areas that the pet would be visible in, or if a
tree branch moving in the wind sets it off, you
can mask the areas where the tree branch is in
the video.
u
Use the Quick De-Select and/or
Tap Screen option to manually mask
a block anywhere on the screen; the
block will turn black. To un-mask a
block, simply tap it again.
v
Use the quick right and left options to
quickly select the right or left side of the
screen to mask. Simply tap this option
again to un-mask.
w
Tap the Save icon when done.
NOTE: Some changes will result in the camera rebooting. If it does, re-launch the App when you see the green
Status indicator light.