Use and Care Manual

— 43 —— 42 —
ALC CONNECT APP SETTING SCREEN
y
Tap Notification Setup. At this
screen you can disable/enable
Email Notifications and/or Push
Notifications. Also set an email
address to send alerts to. Tap Save
when done.
V
Check the days you want to set, then
set the desired start and end times.
You can also tap Random to have
the Power Switch come on randomly.
Tap Save when done.
U
Tap Schedule Setup. At this screen
tap on a device, then tap + to begin
scheduling the On and Off times of
the Power Switch.
Make sure the Control Hub is
connected to the internet so the time
is set automatically and will activate
properly.
Operation
Notes:
• Both Email and Push Notifications are
available for System Arm, Disarm and/or
trigger events generated from Camera, Motion
Detector and Door/Window Sensor selected in
the ARM/DISARM scenario section.
• For iOS app, if you turn off the Notification
function here you will not receive any push
notifications, even when you have turned on
the notification function in the notification
section of the iOS system setting.