Use and Care Manual

— 42 —
ALC CONNECT APP SETTING SCREEN
v
The System Setting screen will
appear. This section will describe the
settings of this screen.
u
Tap the Setting icon to enter the
Setting screen. Enter the Admin
Password (default is 123456). Tap
Confirm when done.
x
Tap Security Setup. At this screen
you can change the Security Code
and Admin Password. You can also
enable/disable and set up a PIN Lock
for the app once enabled; you will
need to enter the PIN Lock code to
enter the app. Tap Save when done.
w
Tap IP Setup. If DHCP is selected,
then the unit will automatically detect
the Protocol settings. To manually set,
uncheck and enter the options as per
your IP. Tap Save when done.
Operation