Use and Care Manual

— 37 —— 36 —
ALC CONNECT APP SCENARIO SCREEN
One-Touch Scenario

Both the ‘One-Touch Scenario’ and the ‘Sequence Scenario’ are designed so you can
customize the functions of the Remote Control buttons and the App controls (to mirror
them) to setup items such as activate single/multiple cameras and sensors for recording
and alerts, etc.
This allows you to conveniently activate the security function(s) with a single touch when
required. The one-touch scenario section has three default controls and they correspond
with the buttons on the remote control. You can customize the content of each to fit your
needs. After setup, the control buttons on the remote will carry out the same commands
as the one-touch scenarios in the app.
First see below for the initial functions of the Remote Control and how the buttons on the
remote correspond to the Scenario Window’s icons.
ARM AWAY-ARM STAY: Arm or Partially Arm the preselected camera(s) and sensor(s).
Select Disarm to disable system’s Arm or Partial Arm status. Only after you have armed
the system will you will be able to receive Email/Push Notification (see page 43). You will
have 30 seconds to exit the premise after initiating the Arm or Part-Arm function.
RECORD: Activate selected camera(s) for immediate recording.
PANIC: Activate selected camera(s), siren(s) and power switch(es) for emergency
recording, alarm sounding and/or Power Switch (lighting) needs.
By default, the devices will appear in the control group list AFTER you have paired them
to the control hub box. Please follow the steps on the next page to edit.