SDS

SAFETY DATA SHEET
Prepared in accordance with
OSHA Hazard Communication Standard (HCS) (29 CFR 1910.1200(g))
MTF-301-01 rev. date: 03/25/2015 Page 1 of 3
Section 1. Product Information and Company Identification
Product: Low Carbon Cast Steel Shot
Bainite Cast Steel Shot
Product Use: Steel Abrasive Blasting and Shot Peening
Company: Metaltec Steel Abrasive Company
41155 Joy Road
Canton, MI 48187
USA
Phone: [phone]
Fax: [phone]
Emergency Phone: [phone]
Section 2. Hazards
As supplied, Cast Steel Shot will not burn or explode. The solid form of material is
not combustible. Fire explosion hazards are moderate when material is in the form
of dust and exposed to heat of flames, chemical reaction, or contact with powerful
oxidizers.
Section 3. Chemical Composition
Element Concentration CAS
C 0.10-0.15% 7440-44-0
Mn 1.00-1.35% 7439-96-5
Si 0.10-0.25% 7440-21-3
Fe >96.00% 1309-37-1
P 0.035% max 7723-14-0
S 0.035% max 7704-34-9
Section 4. First Aid Measures
Eye Contact: Flush with running water to remove particles. Seek
additional medical attention if necessary.
Skin Contact: Brush off excess dust, wash area with soap and water.
Inhalation: Remove to fresh air. Seek medical attention
Ingestion: Seek medical help if large quantities of material have been
ingested.
Section 5. Firefighting Measures
Cast Steel Shot will not burn or explode. The solid form of material is not
combustible. Fire explosion hazards are moderate when material is in the form of
dust and exposed to heat of flames, chemical reaction, or contact with powerful
oxidizers.