Material Safety Data Sheet

Page 5 of 10
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 04/30/2015
Reviewed on 04/30/2015
Trade name: Brown Fused Aluminum Oxide
(Alodur, GF, GF-V, GFK, GFC, A/O, ASF, ASFK, ASFPL, Lionblast, LB, DCF, AOF, ESK,
ZESK)
(Contd. of page 4)
EV (Canada)
LMPE (Mexico)
Long-term value: 10 mg/m³
total dust
Long-term value: 1* mg/m³
A4, *fracciòn respirable
13463-67-7 titanium dioxide
PEL (USA)
REL (USA)
TLV (USA)
EL (Canada)
EV (Canada)
LMPE (Mexico)
Long-term value: 15* mg/m³
*total dust
See Pocket Guide App. A
Long-term value: 10 mg/m³
withdrawn from NIC
Long-term value: 10* 3** mg/m³
*total dust;**respirable fraction; IARC 2B
Long-term value: 10 mg/m³
total dust
Long-term value: 10 mg/m³
A4
·
Additional information: The lists that were valid during the creation were used as basis.
·
Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid close or long term contact with the skin.
Do not inhale dust / smoke / mist.
·
Engineering controls: No further relevant information available.
· Breathing equipment:
Use suitable respiratory protective device in case of insufficient ventilation.
For spills, respiratory protection may be advisable.
· Protection of hands:
Wear gloves for the protection against mechanical hazards according to OSHA and NIOSH rules.
Gloves are advised for repeated or prolonged contact.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer.
·
Eye protection:
Safety glasses
·
Body protection:
Not required under normal conditions of use.
Protection may be required for spills.
(Contd. on page 6)
40.1.5