Operation Manual

5
4 Start up
1. Connect the radio to the main power using the power adapter and switch
on the main switch on the back cabinet. The display will show
Then it will enter the standby mode with the clock set to “00:00”
2. To switch the radio on please use the power button on the remote control.
The radio will now do a quick search for available radio stations.
When the scan is completed, the first station (alphabetically) will begin to
play. If there were no stations found in “Quick Scan”, a “Full Scan” can be
done to find DAB stations which are broadcasting on other frequencies. If
you still encounter difficulties with the reception of radio stations please try
to put the radio in a different location. To improve the reception quality even
further you can connect better antennas which are engineered especially
for DAB signals. For this reason we included the 75 Ohm antenna adapter
in the contents.
4.1 Quick scan
It performs a station scan from channel 7A to 13B. Press the “Scan” button
shortly to do a “Quick scan”.
4.2 Full scan
It performs a station scan from channel 5A to 13F. Press and hold the “Scan”
button to do a “Full scan”.
Press the “POWER” button once, the radio will change from operation mode to
standby mode and the backlight will turn off.
Note: The backlight will automatically turn off after 10sec without any
operation.
------------------
11B 72%
Scan services
Quick Scan
Welcome