Specifications

 Press[6] -  appears and the actual status (ON or OFF) is shown. Repeat operation
to change status.
 Function is not used under Channel Mode.
1.8 ANI Automatic Number Identification
Follow the steps for setting ANI on /off:
 Press [MENU] - appears, next like is blank.
 Press[7] -  appears and actual status (On or OFF) is shown. Repeat operation to
change status.
 Function not in use under Channel Mode.
1.9 HIGH/LOW POWER Selection
This function is for the setting of transmitting power.
 Press [MENU] - appears, next line remains blank.
 Press[8]-  appears and present status (High or Low) is shown. Repeat operation
to change power.
 Setting is separately used in frequency ranges A/B, not in use under Channel Mode.