Operation Manual

Important advice to prepare the headset before wearing on your ear
The headset is being delivered folded up. The same position is used for
charging in the charging station or for storing. To wear it on your ear
please turn the microphone arm (1) as indicated downwards. The earhook
(2) is flexible at the end so that it can be adjusted to the individual ear
shape.
To wear it on your ear fold the earhook (3) backwards for no more than 1 or 2 cm.
The earhook (3) can be adjusted in the rear part (4) so that it fits perfectly to your ear.
The headset is simply hung up on the right ear (5). It will fit comfortably, if you adjust the flexible part of the
earhook (4, 5) to your ear’s shape.
Hint: Please refrain from folding out the earmount any further than necessary. There should only be enough
space between the headset and your ear to ensure a comfortable position. Under no circumstances should
the earmount be folded like the microphone!
Putting your Bluetooth™ headset into operation
After having charged your headset for a while it is now ready for switching it on for the first time. Push the
slide switch at your headset in the position “ON”.
You now have the choice whether you use your „old“ handheld receiver or your Bluetooth™ headset. For
making a telephone call you still have to always lift up your telephone receiver. Dialling as well will still always
be done with your „old“ telephone. If you want to switch over to your Bluetooth™ headset, place the receiver
next to your telephone.
2
3
4
max.1- 2cm,
Danger of breaking!
5
1