Specifications

English 69
When the scanner finds a frequency, Found displays; it does not display
the frequency. Press any key to confirm the displayed frequency. Press
Scan to resume scanning. Every 2 seconds, the scanner checks for
frequencies in the Close Call band you specified (see page 66).
Locking out Channels and Frequencies
You can skip any channel or up to 200 specified frequencies during
Search mode (100 permanent and 100 temporary).
This lets you avoid unwanted frequencies (Search/Close Call modes),
channels that have a continuous transmission, or have static and
interference.
Temporary Lock Out
To temporarily lock out a channel in Scan mode or a frequency in
Search and Close Call modes, manually select the channel or frequency
(see page 65) and then press L/O. TL/O appears. You have
TEMPORARILY locked-out the channel/frequency.
Permanent Lock Out
To permanently locked-out a frequency or channel, press L/O twice
while on that frequency. L/O displays.
Note: You can still manually select locked-out channels.
Unlock Temporary Lock Out
1. Locate the temporarily locked-out channel; press Hold.
2. Press L/O until the lockout status no longer displays.
3. Press Hold again to return to Scan or Search modes.
You can also turn the scanner off and back on. It will unlock all channels
that have been temporarily locked out.
Unlock Permanent Lock Out
To unlock a permanently locked-out frequency/channel:
1 Manually enter the frequency/channel then press Hold. The
frequency and lockout status display.
2. Press L/O until the lockout status no longer displays.
3. Press Hold again to return to Scan or Search modes.