Specifications

Included with Your Scanner

・ Owner’s Manual

・ Scanner and Antenna

・ Belt Clip (with 2 screws)

Note: If any of these items are missing or damaged, contact

your place of purchase.

Batteries are not included.

Setting Up Your Scanner

These guidelines will help you install and use your new scanner:

• If your scanner receives interference or electrical noise,

move the scanner or its antenna away from the

source.

• To improve the scanner’s reception, use an optional

external antenna designed for multiband coverage.

(You can purchase this type of antenna at a local

electronics store). If the optional antenna has no cable,

use 50 Ohm coaxial cable for lead-in. A mating plug

might be necessary for the optional antennas.

• Use an optional mono earphone or mono headset with

proper impedance for private listening. Read the

precautions on the inside front cover of this Owners

Manual.

• Do not use the scanner in high-moisture environments

such as the kitchen or bathroom.

• Avoid placing the scanner in direct sunlight or near

heating elements or vents.

Using different kind of Internal Batteries

You can power your scanner using 2 pcs of Alkaline (standard,

non rechargeable), or NiMH (rechargeable) batteries. The size is

“Mignon” or “AA”, such batteries are available from almost any

shop.

Using Non-Rechargeable Batteries

1. Make sure the power is turned off.

2. Slide the battery compartment cover.

3. Install two fresh batteries in the compartment as indicated by

the polarity symbols (+ and -) marked inside.