Operation Manual

35
Troubleshooting Guide
PROBLEM SOLUTION
Scanner won’t
work
Try one of these options:
• Check the connections at both ends of the
AC adapter. Check whether the 230 V power
distribution socket is turned on. If not, use
another AC wall outlet.
• Check the connections at both ends of the
DC cord or Vehicle Power Adapter.
• Check to see if the fuse is blown. Make sure
the car DC socket is powered.
• Make sure the power switch is turned on.
Bad Reception Try one of these options:
• Check the antenna and its connection.
• Move the scanner.
• You may be in a poor reception area. This
may require an external multi-band
antenna. Check with your dealer or local
electronics store.
Scan won’t stop Try one of these options:
• Check and adjust Squelch.
• Check the antenna connection.
Scan won’t start Try one of these options:
• Press the bank key again.
• Adjust the Squelch Control.
• Program frequencies into the bank before
using (for PRIVATE bank).
• Check to see if all channels are locked out. It
is possible that none of the programmed
frequencies are active at the time. Try the
band search.