Specifications

20
If you selected C-C.bnd , one of the following band names
appears.
bnd Lo : VHF Low Band
bnd Air : AIR Low Band
bnd Hi : VHF High Band
bnd UHF : UHF Band
If you selected C-C.Alt , skip to Step 5.
Step 3.
Repeatedly press ^ or v until the band you want to
search appears, then press E to select it. Otherwise, press
/Clr if you do not want to select it.
The scanner displays the following options.
Lo On or Lo OFF: select the VHF Lo frequency band.
Air On or Air OFF: select the Air frequency band.
Hi On or Hi OFF: select the VHF Hi frequency band.
UHF On or UHF OFF: select the UHF frequency band.
Step 4.
Repeatedly press ^ or v until the option you want
appears, then press E to select it.
Otherwise, press
/Clr , if you do not want to select it. Then
skip to Step 8.
Step 5.
Press E while C-C.Alt appears. One of the following
alert options appears:
ALt bEEP : The scanner beeps when a Close Call signal is
detected.
ALt Light : The scanner flashes the display backlight when a
Close Call signal is detected.
ALt bP-Lt : The scanner flashes the display backlight and
beeps when a Close Call signal is detected.
ALt OFF: The scanner does not provide any alert when a
Close Call signal is detected.
Step 6.
Repeatedly press ^ or v until the option you want
appears, then press E to select it. Otherwise, press
/Clr
if you do not want to select it. Then skip to Step 8.
Step 7.
Repeatedly press ^ or v until the option you want
appears, then press E to select it.
Step 8.
When you selected the option, press /Clr to start
Close Call search.
Otherwise, to continue normal scanning, repeatedly press
Func until F disappears then press Scan.
Using Close Call RF Capture
To turn on the Close Call feature, press Func +
once except in program search or program mode.
appears Every 2 seconds, the scanner checks for
frequencies in the range you specified in “Setting the Close