User Manual
27
English
5.7.2. VOX delay
Long press the EMG/MENU button and then use the UP/DN
keys to select the submenu “VOX T”.
The VOX delay function sets the time after which the automatic
transmission mode is disabled if no speech is detected:
Level 1 2 3 4 5 6 7 8 9
Time (sec) 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
There are 9 congurable delay levels. The default value is level 4.
5.8. Emergnecy channel 9/19
The EMG button is used to switch through CH 9, CH 19 and
back to the previously selected “normal” channel. Simply press
the button repeatedly.
5.9. Main menu
Long press the EMG/MENU button to enter the main menu.
Select your desired submenu with the UP/DN keys and conrm
your selection by pressing the turning knob.
You can make the following settings:
Display Description Selection
KEY BP Key tones ON / OF
ROG BP Roger Beep OFF or select 1-6 tones
SCM Scan settings
S9 = Squelch Scan
T1 = Time Scan
VOX L VOX sensitivity selectable in 9 levels
VOX T VOX delay selectable in 9 levels
RF.GAIN RF Gain selectable in 16 levels
TOT SET Time Out Timer
Cuts of transmission after
0-10 min.
RESET Factory reset Resets the radio