Specifications

3. Turn the scroll control until the name of the custom

search range you want to edit appears, then press E to

select it. The following options appear as you turn the scroll

control.

EDIT NAME lets you edit the custom search

range’s name

EDIT SRCH LIMIT lets you view and select the

frequency ranges to search. The

scanner prompts you to enter the

upper and lower search limits.

SET DELAY TIME lets you set the amount of time the

scanner will delay before continuing

to search after a transmission ends.

SET MODULATION lets you set the custom search

range’s modulation type

SET ATTENUATOR lets you set whether the scanner will

attenuate the input signal reception

by appr. 18dB during search.

SET DATA SKIP lets you set whether the scanner

will skip data transmissions during

SET STEP lets you set the custom search

range’s step (the gap between

frequencies)

4. Select the option you want to change for the custom

search range you selected, then press E.

Auto Search and Store

Your scanner’s Auto Store feature lets you search for new

frequencies in custom search ranges or within a service

search range.

Selecting a System

To store frequencies you find during Auto Store, you must

first select a system where the frequencies will be stored.

1. Press then turn the scroll control until

FOR ... appears. Then press E. One of the search

feature options appear.

2. Turn the scroll control until SEARCH AND STORE

appears, then press E to select it.