Specifications

• To turn search ranges on or off, press 0 and 1-9.

• To hold searching, press Hold.

• To resume searching, press then press

Scan/Srch or Hold again.

• To lock out a frequency found while searching,

press

L/O. SEARCH LOCKOUT? appears.

• Press E to lock out the frequency or No to

continue monitoring.

If you turn off the active custom search range, the scanner

skips to the next custom search range and continues

searching.

Note:

If all frequencies in all active custom search ranges are

locked out, All LOCKED! appears and the scanner does not

stop.

Preset Custom Search Ranges

The preset frequency ranges are as follows:

BAND PLAN 1

Custom Frequency (MHz)

Custom 1 25.0000 - 87.2875

Custom 2 108.0000 - 136.9875

Custom 3 137.0000 - 173.9875

Custom 4 216.0000 - 224.9950

Custom 5 400.0000 - 405.9875

Custom 6 406.0000 - 439.9937

Custom 7 440.0000 - 469.9900

Custom 8 470.0000 - 512.0000

Custom 9 806.0000 - 960.0000

Custom 10 1240.0000 - 1300.0000

Note:

You should select one of the 3 band plans for Your region,

where You operate this scanner. It is recommended to keep

this setting later, because the band plan setting has

influence on the memory locations for storing frequencies

and systems.