Specifications

48
Group-Level Settings
The settings in this section apply to all of the channels
stored in the current group.
Entering/Editing the Group Name
PROGRAM SYSTEM E
Select the system
E
EDIT GROUP
E
Select the group
E
EDIT NAME
E
Follow these steps to enter/edit the group name:
1. Rotate the scroll control to select the first letter.
2. Press and hold down
then rotate the scroll
control once to select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
group name. Then press E or press down on the
scroll control to accept the setting.
Hints:
• Each group name can be up to 16 characters.
Abbreviate as necessary to fit.
• The group and system name alternate in the top
line of the display when the scanner stops on a
channel.
• Press
key twice to delete the current
character.
• Press key
three times to clear the entire alpha
tag.
Setting the Group Quick Key
PROGRAM SYSTEM E
Select the system E
EDIT GROUP E
Select the group E
SET QUICK KEY E
After selecting this option, press 0-9 to assign the group to a
quick key or press No to assign the system to no quick key,
then press E.
Hints:
• You can assign as many groups to the same quick
key as you want.
• To be scanned, a group’s quick key must be
activated.