Specifications

46
UNLOCKED - the system is scanned
Note:
You can also lock or unlock a system by pressing
, selecting the system, then pressing + L/O.
Setting the System Hold Time
PROGRAM SYSTEM E
Select the system E
EDIT SYS OPTION E
SET HOLD TIME E
This setting controls how many seconds the scanner scans
a system before moving to the next unlocked system. Enter
a value from 0-255, then press E to save the setting.
Notes:
• If you select 0, the scanner stays on the system for
a minimal time (only long enough to check current
system activity).
• The default setting is 2 seconds for each system.
• All unlocked channels will be scanned at least
once regardless of this setting.
• The scanner moves to the next system after the
hold time expires, any current transmission ends,
and the channel delay time expires.
Setting the Channel Delay Time
PROGRAM SYSTEM E
Select the system E
EDIT SYS OPTION
E
SET DELAY TIME
E
This setting controls how many seconds the scanner waits
after a transmission ends before resuming scanning. Select
a value from 1-5 or Off, then press E.
Notes:
• The default setting is 2 seconds for each system.
• This setting applies to all channels within the
system.
Setting Data Skip
PROGRAM SYSTEM E