Specifications

45
control once to select the next letter.
3. Repeat Steps 1 and 2 until you have entered the
system name. Then press E or press down on the
scroll control to accept the setting.
Hints:
• Each system name can be up to 16 characters.
Abbreviate as necessary to fit.
• The default system names include C (conventional) or
R (race) in the 16th position to indicate the system
type:
• Press
key twice to delete the current character.
• Press
key three times to clear the entire alpha tag.
Editing the System Quick Key (Conventional
Systems Only)
PROGRAM SYSTEM E
Select the system
E
EDIT SYS OPTION
E
SET QUICK KEY
E
After selecting this option, press 1-9 to assign the system to
a quick key or press No to assign the system to no quick
key, then press E.
Hints:
• You can assign as many systems to the same
quick key as you want.
• To be scanned, a system’s quick key must be
activated and the system must be unlocked.
Setting Group Lockout
PROGRAM SYSTEM E
Select the system E
EDIT SYS OPTION E
SET LOCKOUT E
This setting controls whether the system is scanned when
it’s quick key is enabled. Rotate the scroll control to select
your setting, then press E.
LOCKED - the system is not scanned