Specifications

43
This setting determines whether the scanner will scan this
car when it is enabled. Select your setting, then press E.
LOCKOUT - the car is not scanned.
UNLOCKED - the car is scanned.
Note: The default setting is Unlocked.
Programming Conventional Systems
PROGRAM SYSTEM E
NEW SYSTEM
E CONVENTIONAL
E CONFIRM? E
The scanner creates an empty conventional system, with
a default name of SYSTEM NNN C.
NNN increments as you add new systems. C indicates that
this is a conventional system.
Refer to the appropriate section to set system-wide options:
• See “Editing the System Name”
• See “Editing the System Quick Key (Conventional
Systems Only)”
• See “Setting Group Lockout”
• See “Setting the System Hold Time”
• See “Setting the Channel Delay Time”
• See “Setting Data Skip”
• See “Deleting Systems”
• See “Copying Systems”
• See “Entering/Editing Conventional Channel Groups”
Entering/Editing Conventional Channel Groups
To enter channels in a conventional system, first set up a
channel group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Setting Up a Channel Group
EDIT GROUP E
NEW GROUP E
The scanner creates a group with a default name of
GROUP NN. NN increments by one for each new group you
create within a system.
Refer to the appropriate chapters to set group-wide options: