Specifications

33
• PC CONTROL Lets you set the baud rate your scanner
uses to communicate with a personal computer. See
“Connecting Your Scanner to a Personal Computer”.
• WIRED CLONE Lets you set your scanner as a master
or a slave, letting you transfer programming to or from
another AE230H scanner. See “Cloning the Scanner”
Connecting Your Scanner to a Personal Computer
To connect your scanner to a personal computer, you must
first set the scanner’s baud rate (the rate at which data is
transferred between the scanner and the computer, in bits
per second (bps)).
Hint: If you have trouble transferring data between your
scanner and your computer, try setting the baud rate to a
slower setting.
XFER INFORMATION
E
PC CONTROL E
• OFF The baud rate is not set.
• 9600 BPS The baud rate is set to 9600 bps.
• 19200 BPS The baud rate is set to 19,200 bps.
• 38400 BPS The baud rate is set to 38,400 bps.
• 57600 BPS The baud rate is set to 57,600 bps.