Specifications

32
have highest priority. PRI appears when you select this
mode.
• PLUS ON: The scanner only scans priority channels in
unlocked systems. PRI flashes when you
select this mode.
Using the Backlight
SET BACKLIGHT E
• 10 SEC The backlight stays on for 10 seconds after
you press
+ .
• 30 SEC The backlight stays on for 30 seconds after
you press
+ .
• SQUELCH The backlight turns on when the squelch
opens then stays on for 5 seconds.
• KEYPRESS The backlight turns on when any key is
pressed then stays on for 10 seconds.
• INFINITE The backlight turns on when you press
+ then stays on until you press
+ again.
Pressing any key while the backlight is on extends the
backlight period. Pressing
+ while the backlight
is on turns off the backlight.
Initializing the Scanner’s Memory
Important! This deletes all preprogrammed data except for
the band plan!
To initialize the scanner’s memory, turn off the scanner.
Then, press 2, 9, and Hold while turning it on.
Notes:
• If you initialize the scanner after changing the band
plan, custom search range is adjusted to match to the
band plan.
• If you want to program the deleted data again, use
the PC Control and cloning options.
Using the PC Control andCloning Options
Use the included connection cable to connect your scanner
to another AE230H scanner or your personal computer.
XFER INFORMATION E