Specifications

31
Other Settings
Displaying System Information
Viewing Memory Used
SEE SCANNER INFO E
% MEMORY USED E
A bar showing the percent of memory used appears. Press
any key to return to the previous menu.
Viewing the Firmware Version
SEE SCANNER INFO E
FIRMWARE VERSION
E
Press any key to return to the previous menu.
Adjusting the Key Beep
ADJUST KEY BEEP E
• OFF: The scanner is silent when you press a key.
• ON: The scanner beeps when you press a key.
Locking/Unlocking the Keypad
Press and hold down
then press to lock or
unlock the keypad.
Turning Power Save On or Off
SET BATTERY SAVE E
• ON: The scanner goes into low-power mode when
you monitor a conventional channel that has no
activity.
• OFF:
Power save is off.
Priority Scan
SET PRIORITY E
Or, while holding on any channel, press + 1/Pri to
select one of these priority modes:
• OFF: Normal scanning
• ON: While scanning, the scanner interrupts every 2
seconds and checks the priority channels in
each unlocked system. Priority channels in lower
priority key numbered systems (starting from 1)