Specifications

29
Selecting System Channel Groups
Within a system, you can assign groups of channels to a
group quick key (see “Setting the Group Quick Key”)
Follow these steps to activate or deactivate a channel group
within a system while scanning.
• Press
to hold on the system (or hold
and rotate the scroll control to select the
system).
• Continue to hold
and press the number key
corresponding to the channel group you want to
activate or deactivate.
Locking/Unlocking Systems
Follow these steps to lock out a system so that it does not
scan even if its quick key is selected.
• While holding down
, rotate the scroll control
to select the system.
• Continue to hold down
and press L/O to lock
out the system.
• Repeat Steps 1 and 2 to unlock a system you
have previously locked.
Note: You can unlock only one race at a time. When you
unlock a race, the scanner automatically locks the other
races.
Locking/Unlocking Channels
Follow these steps to lock out a channel so that it does not
scan even if its system and channel group are selected.
• While holding down
, rotate the scroll control
to select the system where the channel is stored.
• Release
then press Hold within 2 seconds to
hold on the system.
• Rotate the scroll control to select the channel you
want to lock or unlock.
• 4. Press L/O to lock or unlock the channel.
You can also lock out an active channel by pressing L/O
while the scanner is stopped on the channel.
Temporarily Holding On a System
• To temporarily hold on a system, press and hold
.
• To hold on a different system, continue to
hold
and rotate the scroll control to select the
system.
• Normal scanning resumes 2 seconds after you
release
.