Specifications

2. Press ▲ to move to the next higher
frequency
3. Press ▼ to move down to the
previous frequency.
15
Search Hold Feature
1. Press /LIMIT at anytime to
stop the search.
BAND
5. When search is stopped, you can
press ▲ or ▼ to move up or down 1
frequency step.
Note: The search continues toward
either the upper or lower search limit,
depending on which direction key (▲
or ▼) was pressed last.
4. Press /LIMIT to resume
searching.
BAND
Channel Skip
If a particular channel continues to
interrupt search scanning, it is possible
to set your scanner to skip the
frequency.
If your scanner stops while searching,
press /L/O to lockout the
frequency from the search range.
Note: You can program 20 skip
frequencies. The 21st skip frequency
entered causes the 1st skip frequency
to unlock.
To unlock all skip frequencies at once,
follow this step:
Press and hold /L/O for about
three seconds.
You will hear two beeps when all the
frequencies have been restored.
UB01294AZ_1 2/3/04 1:27 PM Page 15