Specifications

10
Scanning
When you turn on the power, the
AE 77 H automatically starts in the
scan mode.
During normal scanning the scanner
skips unprogrammed or locked out
channels.
When a transmission is received, the
scanner stops on that channel. When
the transmission ends, scanning
resumes automatically after two
seconds.
Channel Lockout
You can lockout any channel so it is
not reviewed during normal scanning.
You can restore the channel to
scanning whenever you wish.
Lockout in Manual Mode
1. Press .
To stop on a channel during scanning,
press .
To resume scanning, press .
2. Select a channel.
a) Enter the channel number.
b) Then press again.
3. Press /L/O to lockout the
channel.
UB01294AZ_1 2/3/04 1:27 PM Page 10